Installing An Expansion Board; Location Of Expansion Board Installation - PRIMERGY BX620 S3 User Manual

Chapter 7 Installing Internal Options

7.6 Installing an Expansion Board

One expansion board (daughter card) can be installed in this server blade. When the
expansion board is installed, you can connect to fibre channel devices, etc. through
the network blade such as the FC Pass-Thru Blade (option).

7.6.1 Location of Expansion Board Installation

Install the expansion board in the expansion board slot in the server blade.
196
• When installing or removing an expansion board, make sure to remove the
server blade from the chassis. Failure to do so may cause electric shock.
For details on how to remove the server blade from the chassis, refer to
"BX600 S2 Blade Server System Unit Hardware Guide".
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• Expansion cards are susceptible to static electricity. Place them on conductive
pads or keep them in their packaging as long as they are not necessary.
Expansion board slot