Event Logs - PRIMERGY BX620 S3 User Manual

Chapter 5 Operations after OS Installation
■ Deleting a Team
Follow the steps below to delete a Team.
1
Log on to the server blade with administrator privileges.
2
Click [Start] → [Settings] → [Control Panel] → [Intel
®
Intel PROSet.
3
Select the OS to delete.
4
Click [Delete team].
The confirmation message appears.
5
Click [OK].
6
Click [OK] to exit Intel
7
Restart the server blade.
Creating an AFT, ALB, or SFT team in Windows Server 2003 or Windows 2000 Server causes a virtual
adapter (Intel(R) Advanced Network Service Virtual Adapter) to be created in [Device Manager],
[Network and Dial-up Connections], or [Network Connection] of the system. However, do not disable or
delete the virtual adapter from [Device Manager], [Network and Dial-up Connections], or [Network
Connection]. When deleting the virtual adapter, make sure to use Intel

■ Event logs

When AFT, ALB, or SFT is used, the following event logs will be generated (source: i ANSMiniport).
ID Type
6 Information
7 Information
8 Information
10 Information
11 Warning
12 Information
13 Warning
14 Information
15 Information
16 Error
17 Information
18 Information
19 Information
158
®
PROSet.
table: Event log messages
The primary adapter has been initialized: (Adapter name)
The adapter has been initialized: (Adapter name)
(Team name): The team has been initialized.
The current primary adapter is changed from the next adapter: (Adapter name)
The next adapter link is not connected: (Adapter name)
The secondary adapter has a priority: (Adapter name)
(Adapter name) has been disabled with a team.
The secondary adapter has been added to a team again: (Adapter name)
The next adapter link is connected: (Adapter name)
(Team name): The last adapter has been unlinked. Network connection has failed.
(Team name): The adapter has established a link again. The network connection has been
recovered.
The primary adapter at the next priority level has been detected: (Adapter name)
The secondary adapter at the next priority level has been detected: (Adapter name)
®
PROSet Wired], and start
®
PROSet.
Message