Fibre Channel Expansion Board Specifications; Expansion Card Slot Module Specifications - PRIMERGY BX620 S3 User Manual

B.4

Fibre Channel Expansion Board Specifications

■ Package
• 2 Gbit/s FC I/O Module (1)
• Fixing screws (3)
• SFP modules (2)*
*: Provided only with 2 Gbit/s FC I/O Module (PG-FCD101).
■ Specifications
Item
Product name
Model
Interface
Host bus
specifications Data transfer rate
Data transfer system
Topology
Transmission
Fibre Channel
specifications /
specifications
Connector
Data transfer rate
Controller LSI
*: The PCI-X bus interface of the expansion board slot of this server blade is max. 100MHz, and the data transfer rate of the 2
Gbit/s FC I/O Module is max. 800MB/sec.
B.5

Expansion Card Slot Module Specifications

■ Package
• Expansion card slot module (1)
■ Specifications
Item
Product name
Model
PCI slot
Dimension (unit: mm)
Weight
table: Fibre Channel Expansion Board Specifications
PG-FCD101
PCI-X bus Rev.1.0a, PCI bus Rev.2.2 (Compatible with logical specifications)
Max. 1GB/sec. (At PCI-X bus 133MHz operation)
SFP module (supplied): Multi-mode fibre (Short wavelength: 850nm)
table: Expansion card slot module specifications
PGBCS103
PCI-X (64bit 133MHz) × 1
PRIMERGY BX620 S3 Server Blade User's Guide
Functions and Specifications
2Gbit/s FC I/O Module
PG-FCD102
64 bit/133MHz
Bus master, DMA (5 channels)
Fabric / FC-AL (Arbitrated Loop)
Duplex LC connector
Max. 400MB/sec. (Full duplex)
ISP2312
Contents
Expansion Card Slot Module
PCI-Express (×4) × 1
40 × 200 × 85 (W × D × H)
Approx. 260 g
*
PGBCS104
281
A