Internal View Of Server Blade; Chassis Connector; Expansion Board Slot - PRIMERGY BX620 S3 User Manual

1.3.2 Internal View of Server Blade

[Front]
g
a Expansion Card Slot
b Chassis connector
The following major signals are assigned to this connector.
• LAN port 1 / LAN port 2 (1G bps)
The onboard LAN port 1 and LAN port 2 are connected to the network blade (NET 1/2) on the
rear of the chassis via the middle plane.
• Serial port A
This serial port is connected to the Management Blade for console redirection.
• KVM (keyboard, display, and mouse)
The KVM signal is connected to the switch in the chassis. Switching the KVM enables you to
use the KVM signal of the server blade from each connector of the chassis.
c Expansion board slot
Install an expansion board.
d Port 1 for I/O expansion board and port 2 for I/O expansion board
Ports (Max. 2 ports) for I/O expansion board (Fibre Channel Expansion Board/LAN Expansion
Board). These ports are connected to the network blade (NET 3/4) on the rear of the chassis via
the middle plane.
e Memory slots
A memory module (Add-on RAM module) is installed in the memory slot.
f CPU sockets
Install the CPU.
One socket is installed by default. Up to two sockets can be installed.
g 2.5-inch storage bay
a
PRIMERGY BX620 S3 Server Blade User's Guide
[Rear]
f
1
b
c
d
e
27