Selectable Boot Settings Submenu - PRIMERGY BX620 S3 User Manual

Item
Connection Options
Fibre Channel Tape
Support
Data Rate

8.3.5 Selectable Boot Settings Submenu

When starting the OS from the connected fibre channel device (SAN Boot configuration), select the
device that starts the OS.
Selected Adapter
Adapter Type I/O Address
QLA23nn
Selectable Boot: Disabled
(Primary) Boot Port Name , Lun: 0000000000000000 , 0
Use <Arrow keys> to move cursor, <Enter> to select option, <ESC> to backup
Item
Selectable Boot
table: Items on the Host Adapter Settings Submenu
Setting
• 0
• 1 (at the time of
purchase)
• 2
• Enabled (at the time of
purchase)
• Disabled
• 0
• 1
• 2 (at the time of
purchase)
Qlogic Fast!UTIL Version n.nn
9n00
Selectable Boot Settings
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Boot Port Name , Lun: 0000000000000000 , 0
Press "C" to clear a Boot Port Name entry
table: Items on the Selectable Boot Settings Submenu
Setting
• Enabled
• Disabled (at the time of
purchase)
PRIMERGY BX620 S3 Server Blade User's Guide
Description
Select a connection option.
• 0
When connecting to Fibre Channel Arbitrated
Loop (FC-AL), use this setting.
• 1
For fabric connection, use this setting.
• 2
Enables priority loop connection.
Note:
When connecting with the ETERNUS3000
series, do not set to "2".
Sets whether to enable or disable FCP-2 recovery.
Note:
When connecting with the ETERNUS3000
series, set to [Disabled].
Specifies the HBA data rate.
• 0
Connected with 1G bps.
• 1
Connected with 2G bps.
• 2
Selected automatically.
Description
Sets whether or not to start the OS from the fibre
channel device.
1
8
235