Chapter 4 Manual OS Installation
4.3 Installing the LAN Driver
This section explains the procedure for installing the driver.
For the latest drivers, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).
4.3.1 Checking Network Adapter
The driver installation procedure differs depending on whether the network adapter was recognized
during the OS installation.
1
Log on to the server blade with administrator privileges.
2
Click [Start] → [Administrative Tools] → [Computer Management].
3
Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
4
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
When a recognized network adapter is present, [Network adapters] appears.
116
Recognized
network adapter
Unrecognized
network adapter