Creating Maintenance Tools; Creating A Hardware Configuration Tools - PRIMERGY BX620 S3 User Manual

5.4 Creating Maintenance Tools

This section explains how to create tools for maintaining the server.
Maintenance tools are created with the FloppyBuilder function of ServerStart.
With the FloppyBuilder function of ServerStart, you can create the following tools:
• Hardware Configuration Tools (such as Server Management Tools)
• DOS floppy disks
The FloppyBuilder can be used under environments such as:
• the ServerStart system started on a client computer (recommended)
• the system started on the server using the ServerStart CD-ROM
When creating the tools on a client computer, install ServerStart on the computer beforehand. Install
ServerStart according to "2.4 Preparation for Using ServerStart on a Client Computer" ( pg.42).
If ServerStart of a different version is installed in the computer, make sure to uninstall the ServerStart.
Then perform installation again. For details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling
ServerStart" ( pg.44).

5.4.1 Creating a Hardware Configuration Tools

This section explains how to create a Hardware Configuration Tools from the ServerStart CD-ROM.
Prepare floppy disks as many as the tools you want to create beforehand.
Types of a Hardware Configuration Tool vary by model.
PRIMERGY BX620 S3 Server Blade User's Guide
1
2
3
4
5
6
7
8
9
141