Inspecting The Clutch Bell Housings; Inspecting The Clutch - Derbi GPR 125 Racing Workshop Manual

I
NSPECTING THE CLUTCH BELL HOUSING S C G C U C
1. Inspect:
- Primary sprocket teeth (1).
- Bell housing sprocket teeth (2).
Wear/damage => Replace both sprockets.
Excessive noise when running => Replace both sprockets.
I
NSPECTING THE CLUTCH S C G C U C
1. Inspect:
- Friction disks
Wear/damage => Replace the friction disk assembly.
2. Measure:
- Thickness of the friction disks
Outside that specified => Replace the friction disk ass-
embly.
Measure at 4 different positions.
Thickness (friction disks):
2.9 – 3.1 mm
<2.7 mm>
3. Inspect:
- Separators
Damage => Replace the separator assembly.
60
OUS G