Derbi GPR 125 Racing Workshop Manual page 42

2. Inspect:
- Fuse.
Steps for the inspection:
- Connect the multi-meter to the fuse to check if there is a
circuit.
N.B.
ADJUST THE MULTI-METER SELECTOR TO Ω X.
If the meter indicates , replace the fuse.
3. Replacing:
- Blown fuse.
Replacement steps:
- Disconnect the main switch.
- Fit a new fuse with the correct amperage.
- Turn on the switches to check the functioning of the corres-
ponding electrical devices.
- If the fuse blows again immediately, inspect the electrical
circuit.
WARNING
NEVER USE A FUSE WITH AN AMPERAGE OTHER THAN
THAT SPECIFIED. NEVER USE OTHER MATERIALS INSTEAD
OF A FUSE. AN INCORRECT FUSE MAY CAUSE MAJOR DA-
MAGE TO THE ELECTRICAL SYSTEM, MALFUNCTIONING
OF THE LIGHTS AND IGNITION, AND MAY ALSO CAUSE
A FIRE.
4. Fit:
- Fuse box.
- Fuel tank
See "SEATS, FAIRING AND FUEL TANK" section.
41