Inspecting The Switches; Connections For The Switches Shown In This Manual - Derbi GPR 125 Racing Workshop Manual

I I
NSPECTION STEPS NSPECTION STEPS
Using a multimeter, check the circuit between the terminals
to make sure that they are correctly connected. Replace the
component if any of the combinations gives an incorrect rea-
ding.
N.B.
- SWITCH THE "ON" AND "OFF" SWITCH ON AND OFF
SEVERAL TIMES.
- ADJUST THE METER SELECTOR TO THE "X1" POSITION.
- ADJUST THE GAUGE TO "ZERO".
C C
ONNECTIONS FOR THE SWITCHES SHOWN IN THIS MANUAL ONNECTIONS FOR THE SWITCHES SHOWN IN THIS MANUAL
This manual contains connection tables like this one in the
figure on the left, showing the switch terminal connections
(main switch, brake switch, light switch, etc.).
The column on the far left indicates the different switch po-
sitions, the top line indicates the colours of the conductors
connected to the switch terminals.
" "indicates the terminals between which there is closed
circuit at a determined switch position.
In this table:
"BR and "R" have a closed circuit with the switch in the "ON"
position.
135