Adjusting The Throttle Cable - Derbi GPR 125 Racing Workshop Manual

5. Adjust:
- CO concentration.
Adjustment steps:
- Turn the mixture screw inwards or outwards until the spe-
cified CO concentration is obtained.
Adjustment band:
Rub probe point~ up to 6 turns outwards.
N.B.
TURN THE NO LOAD RUNNING SCREW (2) TO ADJUST
THE ENGINE'S NO LOAD RUNNING, SINCE THE CO
CONCENTRATION ADJUSTMENT MAY AFFECT THE NO
LOAD RUNNING.
- After adjusting, check the CO concentration and remove
the CO probe. Ensure that there are no variations in the
idle speed.
A A
DJUSTING THE THROTTLE CABLE DJUSTING THE THROTTLE CABLE
N.B.
BEFORE ADJUSTING THE THROTTLE CABLE, THE NO LOAD
RUNNING MUST BE ADJUSTED.
1. Check:
- Throttle cable play (a).
Outside that specified => Adjust.
Clearance:
2÷6 mm.
In the throttle twist grip plate:
2. Adjust:
- Throttle cable play.
Adjustment steps:
N.B.
NEVER ACCELERATE WHILE THE ENGINE IS STOPPING.
29