Fitting The Chain Sprocket And The Drive Chain - Derbi GPR 125 Racing Workshop Manual

F F
ITTING THE CHAIN SPROCKET AND THE DRIVE CHAIN ITTING THE CHAIN SPROCKET AND THE DRIVE CHAIN
1. Fit:
- Chain sprocket assembly
2. Fit:
- Drive chain (1).
- Coupling link (2).
- Coupling plate (3).
3. Fit:
- Circlip (1).
ATTENTION
FIT THE CHAIN COUPLING CIRCLIP FACING IN THE DIREC-
TION INDICATED IN THE FIGURE
4. Fit:
- Pinion
- Gear change pedal
See the "DISMANTLING THE ENGINE" section in CHAP-
TER 4.
5. Adjust:
- Drive chain tension
See the "ADJUSTING THE DRIVE CHAIN TENSION" sec-
tion in CHAPTER 3.
6. Tighten:
- Wheel axle.
118