Download  Print this page

Advertisement

Table of Contents
1. Fit:
- Torsion spring (1).
- Positioning cam (2)
- Bolt
N.B.
SECURE THE SPRING TO THE STOP CAM AND ENSURE THE
LATTER IS IN THE CORRECT POSITION,
THEN TIGHTEN THE SECURING BOLT TO THE SPECIFIED
TORQUE.
Bolt (limiter rod):
14 N.m (1.4 kgf.m)
2. Fit:
- Gear change shaft assembly (3).
N.B.
APPLY GREASE TO THE RETAINING RING PINS FIT THE ENDS
OF THE SPRING INTO THE LIMITER (4).
72

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: