Rear Wheel And Brakes Dismantling; Dismantling The Rear Disk Calliper - Derbi GPR 125 Racing Workshop Manual

D D
ISMANTLING ISMANTLING
WARNING
- ENSURE THAT THE MOTORCYCLE IS SUPPORTED FIRMLY
AND THERE IS NO RISK OF IT FALLING.
- PLACE THE MOTORCYCLE ON A FLAT SURFACE.
1. Extract:
- Wheel axle (1).
- Spacer.
N.B.
ON WITHDRAWING THE WHEEL AXLE, THE SPACER WILL
DROP DOWN. TAKE CARE NOT TO LOSE IT.
2. Extract:
- Rear wheel.
N.B.
ON EXTRACTING THE WHEEL, PUSH THE WHEEL FORWARDS
TO REMOVE THE DRIVE CHAIN, THEN EXTRACT THE WHEEL
BACKWARDS TO AVOID THE BRAKE CALLIPER.
D D
ISMANTLING THE REAR DISK CALLIPER ISMANTLING THE REAR DISK CALLIPER
- Loosen the bolt at the bottom end of the flexible brake hose
and tighten it slightly (1)
- Unscrew the bolt securing the brake puller (2) and remove
the clips (3) joining the flexible hose to the puller.
- Extract the wheel axle (4).
- Remove the brake calliper (5).
PRECAUTION
CLEAN OFF ANY SPILT BRAKE FLUID REMAINS IMMEDIATELY.
108