Download  Print this page

Shock Absorber And Swinging Arm Dismantling; Shock Absorber And Swinging Arm Inspection - Derbi GPR 125 Racing Workshop Manual

Hide thumbs

Advertisement

Table of Contents
D
D
ISMANTLING
ISMANTLING
1. Place the motorcycle on a flat surface.
WARNING
ENSURE THAT THE MOTORCYCLE IS SUPPORTED FIRMLY
AND THERE IS NO RISK OF IT FALLING.
2. Extract:
- Rear wheel.
- Wheel sprocket.
- Brake disk.
- Rear calliper.
See the "GEAR RATIO" section.
3. Extract:
- Nut (top and bottom).
- Shock absorber.
4. Extract:
- Swinging arm shaft nut.
- Wheel axle nut.
- Washers (swinging arm).
- Shafts.
- Swnging arm.
I
I
NSPECTION
NSPECTION
1. Inspect:
- Swinging arm play
Play => Tighten the joint shaft nut or replace the bushes.
- Swinging arm vertical movement
Irregular movement/warping/stains => Replace the bushes.
- Swinging arm vertical movement
Irregular movement/warping/stains => Replace the bushes.
2. Inspect:
- Shock absorber Fluid leaks/damage => Replace the shock
absorber.
130

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

   Related Content for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: