Download  Print this page

Adjusting The Timing Chain Tension - Derbi GPR 125 Racing Workshop Manual

Hide thumbs

Advertisement

Table of Contents
A
DJUSTING THE TIMING CHAÍN TENSION
JUS
G
G C
1. Put the motorcycle on the centre stand.
2. Check:
- Drive chaIn tension (a).
Outside that specified => Adjust.
(distance between the chain guide and the furthest point
vertically)
Drive chain tension:
11 mm
3. Loosen:
- Axle nut (1) (both sides).
4. Loosen:
- Axle (2).
5. Adjust:
- Drive chain tension.
- Move the axle inwards or outwards using the bolt (3) until
the specified tension is obtained.
6. Tighten the axle nuts to the nominal torque.
Nut (rear wheel axle):
70-80 N.m (7-8 kgf.m)
36
S O

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

   Related Content for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: