Download  Print this page

Assembling The Front Wheel - Derbi GPR 125 Racing Workshop Manual

Hide thumbs

Advertisement

Table of Contents
3) DO NOT MIX TWO TYPES OR BRANDS OF FLUID FOR
USE IN THE BRAKE. THIS LOWERS THE BRAKE FLUID EVA-
PORATION POINT AND MAY RESULT IN THE BRAKES NOT
WORKING EFFICIENTLY. IN ADDITION, IT MAY CAUSE DE-
TERIORATION OF THE BRAKE PARTS.
4) DO NOT LEAVE THE RESERVOIR CAP OFF AT ANY TIME,
TO PREVENT CONTAMINATION OF THE FLUID.
5) DO NOT CHANGE THE FLUID IN RAINY OR VERY WIN-
DY CONDITIONS.
6) EXCEPT ON THE BRAKE LININGS AND THE DISK, USE
ONLY BRAKE FLUID, ISOPROPILIC ALCOHOL OR ETHYL
ALCOHOL FOR CLEANING BRAKE PARTS. DO NOT USE
ANY OTHER TYPE OF LIQUID FOR CLEANING THESE PAR-
TS.
PETROL, ENGINE OIL OR ANY OTHER PETROLEUM DIS-
TILLATE WILL CAUSE RUBBER PARTS TO DETERIORATE.
IF OIL IS SPILT ON ANY PART, IT WILL BE DIFFICULT TO
CLEAN COMPLETELY AND MAY DETERIORATE THE RUB-
BER USED IN THE DISK BRAKE.
7) ON HANDLING THE DISK BRAKE LININGS OR THE DISK,
TAKE CARE TO ENSURE THAT NO BRAKE FLUID COMES
INTO CONTACT WITH THEM. CLEAN ANY REMAINS OF
BRAKE FLUID THAT ACCIDENTALLY COMES INTO CON-
TACT WITH THE LININGS OR WITH THE DISK WITH A SOL-
VENT WITH A HIGH INFLAMMATION POINT. DO NOT USE
ONE THAT LEAVES GREASY RESIDUES. IF LININGS CAN-
NOT BE CLEANED SATISFACTORILY, CHANGE THEM FOR
NEW ONES.
8) BRAKE FLUID DESTROYS PAINTED SURFACES RAPIDLY.
CLEAN OFF ANY SPILT REMAINS IMMEDIATELY.
9) IF ANY OF THE BRAKE SYSTEM PIPE SECURING SYSTE-
MS OR THE BLEED VALVE OPENS AT ANY TIME, THE AIR
CAN BE BLED FROM THE BRAKE SYSTEM PIPE.
A
A
SSEMBLING THE FRONT WHEEL
SSEMBLING THE FRONT WHEEL
1. Fit:
- Speedometer assembly
104

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: