Adjusting The Headlight Beam; Replacing The Headlight Bulbs - Derbi GPR 125 Racing Workshop Manual

A A
DJUSTING THE HEADLIGHT BEAM DJUSTING THE HEADLIGHT BEAM
1. Adjustment
- Headlight beam height
To adjust the height, turn the screw (2) in one of two direc-
tions:
SCREWING IN => Lower
UNSCREWING => Raise
2. Adjust:
- Headlight dispersion.
To adjust the headlight width, turn the screw (1) in one of
two directions:
SCREWING IN => Increase
UNSCREWING => Decrease
R R
EPLACING THE HEADLIGHT BULBS EPLACING THE HEADLIGHT BULBS
1. Extraiga:
- Headlight bulb holder.
Disconnect the bulb holder, turn it a quarter turn (see photo)
and pull it out.
Change the blown bulb and refit by repeating the process in
the reverse order.
2. If the whole headlight unit needs to be changed, carry
out the following process:
- Disconnect the bulb holder (1).
- Remove the screws (2) at the top, on the bottom inside and
outside under the cover (3).
The headlight can now be removed though the inside of the
front fairing.
42