Changing Turn Indicator Bulbs; Changing The Side And Brake Light Bulbs - Derbi GPR 125 Racing Workshop Manual

WARNING
KEEP INFLAMMABLE PRODUCTS AND HANDS AWAY FROM
THE BULB WHILE IT IS LIT, BECAUSE IT WILL BE HOT. DO
NOT TOUCH IT UNTIL IT COOLS DOWN.
ATTENTION
AVOID TOUCHING THE BULB GLASS. KEEP IT FREE OF OIL.
IF NOT, THE TRANSPARENCY OF THE GLASS, THE DURABI-
LITY OF THE BULB AND THE AMOUNT OF LIGHT EMITTED
WILL BE AFFECTED. IF THE BULB BECOMES SOILED WITH
OIL, CLEAN IT CAREFULLY WITH A DAMP CLOTH OR WITH
ALCOHOL OR THINNER.
C C
HANGING TURN INDICATOR BULBS HANGING TURN INDICATOR BULBS
1. Extract:
- Glass screw (1).
2. Dismantle:
- Glass cover.
- Power supply terminals
3. Turn the bulb carefully and pull out forwards.
4. Change the bulb (if necessary).
5. Reverse the dismantling process and refit the turn in-
dicator.
C C
HANGING THE SIDE AND BRAKE LIGHT BULBS G G S
1. Extract:
- Passenger seat.
2. To remove the BRAKE LIGHT, turn the bulb holder (1) in
an anticlockwise direction and pull out.
3. To remove a SIDE LIGHT bulb, pull out the bulb holder (2).
43
G U S