Download  Print this page

Adjusting The Front Brakes; Adjusting The Rear Brakes; Inspecting The Brake Pads - Derbi GPR 125 Racing Workshop Manual

Hide thumbs

Advertisement

Table of Contents
A
A
DJUSTING THE FRONT BRAKES
DJUSTING THE FRONT BRAKES
This machine is fitted with hydraulically activated disk brakes.
This type of brakes comes with adjustment factory set.
You must check that the brake fluid level is between the maxi-
mum and minimum.
N.B.
REMEMBER THAT THE LEVEL WILL BE AFFECTED BY THE DE-
GREE OF BRAKE PAD WEAR.
A
A
DJUSTING THE REAR BRAKES
DJUSTING THE REAR BRAKES
1. Check:
- Brake pedal clearance (a).
Outside that specified => Adjust.
Clearance:
5 - 10 mm
2. Adjust:
- Brake pedal clearance.
Adjustment steps:
Unscrew the nut (1):
Raise or lower the activator (2) to decrease or increase the
lever free clearance.
ATTENTION
ENSURE THAT THE BRAKES ARE NOT BINDING AFTER AD-
JUSTING THE PLAY.
I
I
NSPECTING THE BRAKE PADS
NSPECTING THE BRAKE PADS
1. Apply the brake pedal or lever.
2. Inspect:
- Pads.
- Measure the brake pad lining thickness. If either of them is
below the service limit => Replace both pads.
Service limit (lining) => 1.5mm.
35
Joc palanca fre

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: