Locking Rings; Special Tools - Derbi GPR 125 Racing Workshop Manual

L L
OCKING RINGS OCKING RINGS
1. Examine all the locking rings carefully before fitting.
Always replace the gudgeon pin circlips after every use. Re-
place distorted locking rings. On fitting a locking ring (1),
ensure that the sharp edge (2) is on the opposite side to the
force (3) to be applied to it.
See the figure on the side, (4) Axle.
S S
PECIAL TOOLS PECIAL TOOLS
The following special tools are needed for assembly and for
complete and exact adjustments. Only use the proper special
tools; thereby avoiding damage caused by the use of unsui-
table tools or improvised techniques.
1.00M12501258
Gudgeon pin extractor.
This tool is used for dismantling the gudgeon pin.
00M12501259
Magneto flywheel extractor.
This tool is used for dismantling the magneto flywheel.
9