Electrical System; Inspecting The Fuses - Derbi GPR 125 Racing Workshop Manual

N.B.
AFTER CLEANING THE TERMINALS, APPLY A THIN LAYER
OF GREASE TO THEM.
Replace the battery if:
- The voltage falls below a specific value.
ATTENTION
BEFORE USING THE NEW BATTERY, IT MUST BE CHARGED
TO ENSURE MAXIMUM PERFORMANCE.
3. Fit:
- Battery.
4. Connect:
- Battery cables.
ATTENTION
CONNECT THE POSITIVE CABLE (1) TO THE BATTERY FIRST
AND THEN THE NEGATIVE CABLE (2).
5. Fit:
Fuel tank
See "SEATS, FAIRING AND FUEL TANK" section.
I I
NSPECTING THE FUSES NSPECTING THE FUSES
ATTENTION
ALWAYS DISCONNECT THE MAIN SWITCH WHEN INSPEC-
TING OR REPLACING A FUSE. FAILURE TO DO SO MAY RE-
SULT IN A SHORT CIRCUIT.
1. Lift out and remove to the left
- fuel tank
See "SEATS, FAIRING AND FUEL TANK" section.
– Fuse box (1).
40