Download  Print this page

Advertisement

Table of Contents
3. Starter motor
- Connect the positive terminal of the battery (1) and the
starter motor cable (2), using a bridging conductor (3) on
the relay (4) as shown in the figure.
*as in the figure.
- Check starter motor functioning.
4. Starter relay
-
Disconnect the starter relay connection from the electri-
cal system.
- Connect the battery to the starter relay, using bridging
connectors (1).
Check starter motor functioning.
141
T
URNS OVER
T
URNS OVER
WARNING
THE CONDUCTOR USED FOR BRIDGING
MUST HAVE A CAPACITY COMPATIBLE
WITH THAT OF THE STARTER MOTOR. IF
NOT, THE MOTOR MAY BURN OUT.
D
OES NOT TURN OVER
Defective starter motor – repair or replace.
D
OES NOT TURN OVER
Defective starter relay – replace.
WARNING
TAKE CARE NOT TO REVERSE THE BATTERY
CONNECTIONS, OR DAMAGE MAY BE
CAUSED TO THE DIODE TAKE CARE NOT
TO CAUSE A SHORT CIRCUIT BETWEEN
THE POSITIVE AND NEGATIVE TERMINALS
WHEN CONNECTING THE BATTERY AND
THE RELAY.

Advertisement

Table of Contents

   Also See for Derbi GPR 125 Racing

This manual is also suitable for:

Gpr 125 racing

Comments to this Manuals

Symbols: 0
Latest comments: