Seats, Fairing And Fuel Tank; Dismantling - Derbi GPR 125 Racing Workshop Manual

D D
ISMANTLING ISMANTLING
1. Extract:
- Seat.
N.B.
INSERT THE IGNITION KEY, TURN IT CLOCKWISE A QUAR-
TER TURN AND THEN REMOVE THE SEAT.
2. Extract:
Passenger seat.
- The nut under the seat must be unscrewed.
- Pull the seat forwards.
3. Extract:
- Cowling.
The black cover (1) in the figure must be be removed by uns-
crewing the bolts (2) on both sides.
The studs (4) on both sides then need to be unscrewed, and
the clamp securing the exhaust pipe. The cowling (3) can
then be removed by pulling out backwards.
4. Closing:
- Dismantle:
- Top side cover.
To do so, the front air inlet (5) needs to be removed on the
corresponding side together with its securing bolts (6).
Then remove the bolts securing the cover (indicated in the
fugure).
26