Fitting The Engine Into The Frame - Derbi GPR125 Workshop Manual

4 - ENGINE

4.6 - FITTING THE ENGINE INTO THE FRAME

N.B.
1. Fit:
- The engine to the frame
2. Fit:
- The 2 top mounting bolts (1).
Top mounting bolts (M10)
3,7-3,9 kgf.m (37-39 N.m)
- The swinging arm mounting bolt (2).
Swinging arm mounting bolt
7-8 kgf.m (70-80 N.m)
- The bottom front mounting bolt (3).
Bottom front mounting bolt (onto the chassis cradle)
3,5-4 kgf.m (35-40 N.m)
3. Fit:
- The electrical connections (starter motor, magneto
flywheel cover, etc.).
- The carburettor and its pipes.
- The carburettor clamps (4).
4. Fit:
- The pipe (5) from the radiator to the water pump.
150
IT IS ADVISABLE TO PLACE A
SUPPORT UNDER THE ENGINE
BEFORE FITTING IT ONTO THE
CHASSIS, TO AID THE PRO-
CESS.
ON REFITTING THE ENGINE, IF
NECESSARY USE TOOL CODE
NO. 866714 TO ADJUST THE
SWINGING ARM NUT.
1
3
2
4
5