Nas Removal From The 29U Rack (Standard); Nas Removal From The 29U Rack (Earthquake Feature); Upper Plate Removal In 29U Rack 1) - IBM 300 Service Manual

NAS Removal From the 29U Rack (Standard)

1. Slide the NAS out of the rack.
2. Install the NAS on a table, then go to "FRU Exchange" on page 5-8.

NAS Removal From the 29U Rack (Earthquake Feature)

1. Remove the screws K to remove the retainers J located under the plate G
Figure 5-6. Upper Plate Removal in 29U Rack 1)
2. At the rear of the rack remove the screws H which secure the upper plate G
5-6
2220 Setup and Service Guide
(see Figure 5-6).
G
E
G
K
J
on the rear support D .
H
J
E
D
K
J