Nas Connectors - IBM 300 Service Manual

6
4
F
Figure 1-32. NAS Connectors
2. ____ Connect the cables (see Figure 1-33 on page 1-28) to the APC and APC
tailgate as follows:
a. ____ Plug one T connector (PN 80G0638) into the APC connector 4.
b. ____ Route and plug cable B (PN 10K8667) from the connector 6 of the
APC card into the Ethernet card connector 5 .
c. ____ Route and plug cable C (PN 80G0637) from the T connector
located on connector 4 of the APC card into the tailgate connector J2.
3. ____ Secure the cables into the rack using tie clamps (PN 1159519).
Installing the NAS and Its Modem
3
2
E
D
Chapter 1. Installing and Configuring the NAS and Its Modem
1
5
B
A
1-27