Installing the NAS and Its Modem
Connecting the NAS in the 29U Rack
1. ____ At the rear of the rack (see Figure 1-31 to route and locate the cables and
Figure 1-31. Display and Keyboard Cables Connection to the NAS
2220 Setup and Service Guide
see Figure 1-32 on page 1-27 to locate the connectors at the rear side of the
NAS), plug the cables as follows:
a. ____ Connect the display signal cable A to the NAS connector 1 .
b. ____ Locate the keyboard cable E in the service drawer and plug it into
the NAS connector 2 .
c. ____ Plug the mouse cable D into the NAS connector 3 .
d. ____ Plug the power cord F into a correctly grounded electrical outlet.