Communication Problem Between the NAS and a Remote Console
v You are here because there is a communication problem between the Nways
v The remote operator must have verified locally that his NAS and his modem are
Figure 4-2. NAS Modem Connection
– Check that the modem attached to the Nways Switch administration station is
– If not, switch on the power-on button at the rear panel of the modem.
– Check that the power cable is correctly plugged into the power outlet.
Is the modem powered on?
Switch administration station and a remote console through the public switched
– Suspect a problem in the customer's ac source. Check the customer's ac
Chapter 4. Nways Switch Administration Station Problem Determination