IBM 300 Service Manual page 61

Diagnostic - Interactive Tests - Hardware Info - Utility - Quit - F1=Help
PC-DOCTOR 2.0 Copyright 1999 Watergate Software. All Rights Reserved.
Diagnostic tests that check the functionality of your PC.
Use the Cursor keys and ESC to move in menus. Press ENTER to select.
6. Select the Diagnostics option in the title bar and press Enter.
7. The following window appears:
Diagnostic - Interactive Tests - Hardware Info - Utility - Quit - F1=Help
Run Normal Test
Run Quick Test
CPU/Coprocessor
System Board
Video Adapter
Serial Ports
Parallel Ports
Fixed Disks
Diskette Drives
Other Devices
Interactive Tests
Zip Drive
LS-120 Drive
CD-ROM/DVD Drive
Memory Test - Full
Memory Test - Quick
Fixed Disk Optimized Test
PC-DOCTOR 2.0 Copyright 1999 Watergate Software. All Rights Reserved.
Use the Cursor keys and ESC to move in menus. Press ENTER to select.
8. For a quick check of the Nways Switch administration station, select the Run
Quick Test option, then press Enter. If you want test a particular device,
select it on the list, then press Enter. If you want a more complete test, select
Run Normal Test, then press Enter.
9. During the test execution, several windows appear showing the part tested and
the test status. Wait until the tests stop.
10. If the test is not error free, refer to the IBM Personal Computer 300 Series,
700 Series, IntelliStation; Hardware Maintenance Manual , S83G-7789 to
identify the problem. If you have to exchange a FRU, go to Chapter 5. Nways
Switch Administration Station FRU and Display Exchange Procedures.
Otherwise, continue with the following steps.
11. Press Esc to exit from the test window, and then remove the diagnostics
diskette.
12. Select Quit in the title bar, then press Enter.
Chapter 3. Nways Switch Administration Station Diagnostics
3-3