IBM 3454-A3C Customer Install Manual

Cloud pak for data system 1g switch

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

IBM Cloud Pak for Data System

Customer Install Guide

1G Switch

3454-A3C

Version 1.5

Note

Before using this information and the product it supports, read the information in

"Safety notices" on page 5, "Notices" on page 45, the IBM Systems Safety Notices

manual, G229-9054, and the IBM Environmental Notices and User Guide, 03FP290.

Customer Install Guide, 1G Switch

Table of Contents

Need help?

Do you have a question about the 3454-A3C and is the answer not in the manual?

Questions and answers

Summary of Contents for IBM 3454-A3C

Page 1 Note Before using this information and the product it supports, read the information in “Safety notices” on page 5, “Notices” on page 45, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, 03FP290. © Copyright IBM Corporation 2019, 2020.
Page 2 This edition applies to IBM Cloud Pak for Data System Components. Revised February 2020 © Copyright IBM Corporation 2019, 2020. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. with IBM Corp.
Page 3: Table Of Contents
Location in the Rack ..........................18 Package Contents: ........................... 22 Contents: 01FT693, Duct Kit ......................22 Contents: 3454-A3C, 1G Switch ......................22 1G Switch Stacked Installation Procedure ................... 23 Installing the1G Switch in a rack ......................23 Before you begin ..........................23 About this task ..........................
Page 4: Safety
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d'installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 5: Safety Notices
Be sure to read all caution and danger statements in this documentation before you perform the procedures. Read any additional safety information that comes with your system or optional device before you install the device. D005 © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 6 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power  cord. Do not use the IBM provided power cord for any other product.
Page 7  Heat to more than 100°C (212°F)  Repair or disassemble  Exchange only with the approved part. Recycle or discard the battery as instructed by local regulations. (C002) © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 8 (C026) IBM® servers can use I/O cards or features that are fiber-optic based and that utilize lasers or LEDs. Laser compliance IBM servers may be installed inside or outside of an IT equipment rack.
Page 9 It is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock. (R001 part 1) R007 © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 10 DANGER: Hazardous voltage, current, or energy levels are present inside any component that has this label attached. Do not open any cover or barrier that contains this label. (L001) L002 © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 11 CAUTION: This part or unit is heavy but has a weight smaller than 18 kg (39.7 lb). Use care when lifting or installing this part or unit. (C008) (L003) © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 12 (English translation: After providing the main product, if additional power cord is required, the cord is handled for repair/maintenance/mending purpose.) © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 13: Publications
1U chassis will utilize an extra 1G switch as a hub switch. The switch can be installed in an IBM Cloud Pak rack or a customer supplied rack meeting the guidelines in the Customer Install Guide, Rack and System document included on the Safety and Regulatory CD shipped with your Cloud Pak for Data ©...
Page 14 Cloud Pak for Data System and may void your warranty. Power can be supplied by the available IBM Cloud Pak for Data System PDUs and line cords or by customer supplied PDUs meeting the power requirements of the Cloud Pak for Data System components.
Page 15: Cloud Pak For Data System 1G Management, Hub Switch Hardware Specifications
. All component installation documents are available on the Safety and Regulatory CD that comes with your Cloud Pak for Data System components. 3454-A3C, Cloud Pak for Data System Management, Hub Switch (1G switch) [see Notes 1, 2] Table 1...
Page 16: Operating Environment
[3] Short term temperature only for servers with SSDs [4] Unit must acclimate to data center environment before unboxing to prevent condensation. [5] PDUs do not have fresh air cooling and can function in 60C (140F) environments © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 17: Rack Requirements
Ensure that the rack in which you plan to install the system meets the space requirements outlined in the following figure: Figure 1: Top down view of installed switch with 4-point horizontal mounting © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 18: Location In The Rack
Location in the Rack The base IBM Cloud Pak for Data System consists of four main components (1G switch, 25G switch, two compute chassis) that are designed to be integrated in the same rack with PDUs. The recommended component placement is shown in Figure 2 below. Other configurations can be used if IBM Safety Notices translations Pub # G229-9054 rules are followed, and the lengths of the supplied cables are not exceeded.
Page 19 Expansion chassis and switches are ordered separately. Expansion chassis and switches can be racked in any order, but the preferred locations are shown in Figure 3. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 20 Chassis 4 (marked 'expansion') 1U Blank Panel Labeled “expansion” Chassis 3 (marked 'expansion') 1U Blank Panel Labeled “2” Chassis 2 1U Blank Panel Labeled “1” Chassis 1 1U Blank Panel © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 21 Figure 4. Front view of installed Cloud Pak component locations with hub and spine switches. Placement of the hub and spine switches is typicaly in rack 3. Hub Switch Spine switch B Spine switch A © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 22: Package Contents
Package Contents: If anything is damaged or missing, contact your IBM representative. Contents: 01FT693, Duct Kit * Choose one nut type, according to the rack that you are installing the system in (square or round rail holes). Contents: 3454-A3C, 1G Switch ...
Page 23: Switch Stacked Installation Procedure
To install the dual 1G switches in a 2U EIA horizontal mounting space of the rack, complete the following steps: Procedure Read the Rack safety notices, Pub # G229-9054 included with the unit. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 29 This mounting location will place the cable mounting bar directly between the two switches. STEP 11 Slide the switch into the rack from the front. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 30 DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power cables. (L003) © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 31 DO NOT BLOCK ANY INLET OR EXHAUST DUCTS, VENTS OR PORTS KEEP ALL POWER CORDS, SIGNAL CABLES AND TRANSCEIVERS WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS. DO NOT POWER-ON THIS CHASSIS. POWER ON WILL BE DONE BY YOUR IBM INSTALLATION TEAM.
Page 32: 1G Switch Single Installation Procedure
To install one 1G switch in a single EIA horizontal mounting space of the rack, complete the following steps: Procedure Read the Rack safety notices, Pub # G229-9054 included with the unit. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 36 NOTE: Each switch ships with a cable management bar. This bar should be mounted using the topmost screw on the switch blade (F). This mounting location will place the cable mounting bar directly at the bottom of the switch. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 38 DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power cables. (L003) © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 39 RECIRCULATING TO THE FRONT OF THE RACK AND INTO THE COLD AIR INLETS. KEEP ALL POWER CORDS, SIGNAL CABLES AND TRANSCEIVERS WITH THE INSTALLED CHASSIS FOR USE BY IBM INSTALLERS. DO NOT POWER-ON THIS SWITCH/CHASSIS. © Copyright IBM Corporation 2019, 2020.
Page 40: Electronic Emissions Notices
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Page 41 Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non- recommended modification of the product, including the fitting of non-IBM option cards. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
Page 42 이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다. People's Republic of China Notice 声明：此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对其干扰采取切实可行的措施。 © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 43 ВНИМАНИЕ! Настоящее изделие относится к классу А. В жилых помещениях оно может создавать радиопомехи, для снижения которых нео Taiwan Notice 警告使用者 : 這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取某些適當的對策。 IBM Taiwan Contact Information: © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 45: Notices
Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
Page 46 Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Page 47 All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. © Copyright IBM Corporation 2019, 2020. Customer Install Guide, 1G Switch...
Page 48: Copyright License
You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written.
Page 49: Trademarks
IBM, the IBM logo, ibm.com® and Netezza® are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S.
Page 50: Readers' Comments
IBM business partner, or your authorized remarketer. When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. IBM or any other organizations will only use the personal information that you supply to contact you about the issues that you state on this form.

This manual is also suitable for:

3454-b8c 3454-c8c 3454-cac

IBM 3454-A3C Customer Install Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IBM 3454-A3C

Summary of Contents for IBM 3454-A3C

This manual is also suitable for:

Table of Contents