How To Test The Link Between The Nas And The Network Support Center; Locally On The Nas; Nways Switch Window List; Slip Driver Correct Status - IBM 300 Service Manual

How to Test the Link Between the NAS and the Network Support
Center

Locally on the NAS

1. When the NAS and the modem are initialized, simultaneously press the Ctrl and
2. Double click on SLIP Dial-In.
Figure 3-1. Nways Switch Window List
3. Verify that the SLIP driver is running as shown in Figure 3-2. If you do not see
Figure 3-2. SLIP Driver Correct Status
Esc keys
this message, an error message will appear. See Figure 3-3 on page 3-6. As
recommended, verify that the modem is correctly configured and connected.
Chapter 3. Nways Switch Administration Station Diagnostics
3-5