Filter Motor Relay - Henny Penny Evolution Elite EEE-153 Technical Manual

6-17. FILTER MOTOR RELAY

6-21
This component is located behind the left control panel and
regulates voltage to the fi lter motor.
Replacement:
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
1. Hinge-down the left control panel.
2. Label and remove wires from relay.
3. Using a 5/16" wrench, remove the nuts securing the relay
and remove relay from fryer.
4. Install new relay in reverse order.
Model EEE-153, 154
409