Henny Penny Evolution Elite EEE-153 Technical Manual page 45

6-5. HIGH TEMPERATURE
LIMIT CONTROL
(Continued)
409
Replacement (continued)
4. Use the lift tool and lift the hinged element from the vat.
Avoid putting the lift tool in the center of the elements, at
the same area as the high limit bulb, or damage to the high
limit could result.
5. Pull the high limit from the bracket, pull back the cardboard
protector, and remove the two electrical wires from the high
limit control.
6. Pull-out on the drain valve knob and drain the oil from the
vat.
7. While holding the top-side capillary bracket, use a
Phillip's-head screwdriver and remove the screws securing
the capillary bulb to the lower element bracket. Remove
both front and rear capillary brackets.
Model EEE-153, 154
6-4