Henny Penny Evolution Elite EEE-153 Technical Manual page 25

5-1. SPECIAL PROGRAM
MODE (Continued)
409
Press and hold the
2"followed by, "SP PROG" and "ENTER CODE" show in
the display.
Enter code 1,2,3, and "SP-1", "TEMP", "FORMAT" show
in the displays.
If a bad code is entered, a tone sounds and "BAD CODE"
shows on the display. Wait a few seconds, the controls
revert back to the cook mode, and repeat the above steps.
To exit from the Special Program Mode at any time, press
and hold button for 2 seconds.
Degrees Fahrenheit or Celsius (SP-1)
The left display fl ashes "SP-1" and "TEMP", "FORMAT".
Press the or
• Use button to go back to previous menu items
• Press button when fi nished with the current Level 2
step
Language (SP-2)
Press button and "SP-2" and "LANGUAGE" fl ash on
the left display. Press the
the desired language.
System Initialization (SP-3)
Press button and "SP-3" and "DO SYSTEM INIT"
fl ash in the display, along with "INIT" on the right display.
To reset the controls to factory default settings, press and
hold  button and control counts down "IN 3", "IN2",
"IN 1". Once display shows "-INIT-" & *DONE* the
controls are reset to factory defaults.
Audio Volume (SP-4)
Press button and "SP-4" and "VOLUME" fl ash in the
left display. Press the
to adjust the volume of the speaker, 10 being the maximum
value and 1 the minimum.
Model EEE-153, 154
button for 5 seconds until "LEVEL
buttons to choose ºF or ºC.
or buttons to select
or , or use product buttons,
5-2