Henny Penny EVOLUTION ELITE EEE-142 Operator's Manual
  1. Manuals
  2. Brands
  3. Henny Penny Manuals
  4. Fryer
  5. Evolution Elite EEE-142
  6. Operator's manual

Henny Penny EVOLUTION ELITE EEE-142 Operator's Manual

Reduced oil capacity open fryer
Hide thumbs Also See for EVOLUTION ELITE EEE-142:
Table of Contents

Advertisement

Quick Links

OPERATOR'S
M A N U A L
EVOLUTION ELITE™ (Electric)
REDUCED OIL CAPACITY OPEN FRYER
MODEL
EEE-141
EEE-142
EEE-143
EEE-144
R E G I S T E R W A R R A N T Y O N L I N E AT W W W. H E N N Y P E N N Y. C O M

Advertisement

Table of Contents
loading

Related Manuals for Henny Penny EVOLUTION ELITE EEE-142

Summary of Contents for Henny Penny EVOLUTION ELITE EEE-142

  • Page 1 OPERATOR’S M A N U A L EVOLUTION ELITE™ (Electric) REDUCED OIL CAPACITY OPEN FRYER MODEL EEE-141 EEE-142 EEE-143 EEE-144 R E G I S T E R W A R R A N T Y O N L I N E AT W W W. H E N N Y P E N N Y. C O M...

  • Page 3: Table Of Contents

    Model EEE-141, 142, 143, 144 TABLE OF CONTENTS Section Page Section 1. INTRODUCTION ..................... 1 Introduction ....................1 Features......................1 Proper Care ....................1 Assistance ...................... 2 Safety ......................2 Section 2. INSTALLATION ....................... 5 Introduction ....................5 Unpacking...................... 5 Selecting the Fryer Location .................
  • Page 4 Model EEE-141, 142, 143, 144 TABLE OF CONTENTS (Continued) Section Page Section 4. INFORMATION MODE ................47 Information Mode Details ..............47 Section 5. PRODUCT PROGRAM MODE ..............52 Modifying Product Settings ..............52 Section 6. LEVEL 2 PROGRAMMING ................55 Special Program Mode .................

  • Page 6: Introduction

    Model EEE-141, 142, 143, 144 SECTION 1. INTRODUCTION 1-1. INTRODUCTION The Henny Penny open fryer is a basic unit of food processing equipment designed to cook foods better and easier. The micro computer-based design helps make this possible. This unit is used only in institutional and commercial food service operations, and operated by qualified personnel.

  • Page 7: Assistance

    Model EEE-141, 142, 143, 144 1-4. ASSISTANCE Should you require outside assistance, call your local independent distributor in your area, or call Henny Penny Corp. at 1-800-417-8405 or 1-937-456-8405. 1-5. SAFETY The Henny Penny open fryer has many safety features incorporated.
  • Page 8 Model EEE-141, 142, 143, 144 1-5. SAFETY (Continued) Equipotential Ground Symbol Waste Electrical and Electronic Equipment (WEEE) Symbol Shock Hazard Symbols Hot Surface Symbols Pinch-Point Symbol (Auto-Lift Fryers) Aug. 2011...

  • Page 10: Section 2. Installation

    Cut and remove the metal bands from the carton. Remove carton lid and lift the main carton off the fryer. THIS DRAWING IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF HENNY PENNY CORP. Remove corner packing supports (4). Cut the stretch film from around the carrier/rack box and remove it from the top of the fryer lid.

  • Page 11: Selecting The Fryer Location

    Model EEE-141, 142, 143, 144 2-3. SELECTING ThE FRYER The proper location of the fryer is very important for operation, speed, and convenience. The location of the open fryer should LOCATION allow clearances for servicing and proper operation. Choose a location which will provide easy loading and unloading with- out interfering with the final assembly of food orders. Opera- tors have found that frying from raw to finish, and holding the...

  • Page 12: Ventilation Of Fryer

    Model EEE-141, 142, 143, 144 2-5. vENTILATION OF FRYER The fryer should be located with provision for venting into an adequate exhaust hood or ventilation system. This is es- sential to permit efficient removal of the steam exhaust and frying odors. Special precaution must be taken in designing an exhaust canopy to avoid interference with the operation of the fryer. We recommend you consult a local ventilation or heating company to help in designing an adequate system.
  • Page 13 Model EEE-141, 142, 143, 144 2-6. ELECTRICAL An all pole, separate disconnect switch, with proper capacity REQUIREmENTS fuses or breakers must be installed at a convenient location (Continued) between the fryer and the power source, and must be installed according to national and local codes. It should be an insulated copper conductor rated for 600 volts and 90°...

  • Page 14: Dimensions

    Model EEE-141, 142, 143, 144 2-7. DImENSIONS Auto-Lift Fryers Front to rear dimension is 36-7/8” (93.66 cm). For doorways 36 in. (91.44 cm) or less, the protective bumper bar on the rear of the fryer must be temporarily removed. See photo below. May 2009...

  • Page 16: Section 3. Operation

    Model EEE-141, 142, 143, 144 SECTION 3. OPERATION 3-1. OPERATING COmPONENTS Refer to explanations on the next pages. Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 (Bulk Oil Supply Fryers Only) Feb. 2011...
  • Page 17 Model EEE-141, 142, 143, 144 3-1. OPERATING COmPONENTS Refer to Figures 3-1, 3-2 & 3-3 in conjunction with the descrip- (Continued) tion of the functions below. Fig. Item Description Function This LED lights when the control calls for heat for the left vat(s), and the elements come on and heat the oil During normal operation, press this button to start and stop cook cycles for the left basket;...
  • Page 18 Model EEE-141, 142, 143, 144 3-1. OPERATING COmPONENTS (Continued) Fig. Item Description Function 10 & 11 Each product button LED lights when that particular product has been selected, or when it is compatible with cook temperature Press to select the desired product; press to place the letters under the button, during naming a product in Program Mode can be used to start an Idle Mode if enabled in Special Program Mode...
  • Page 19 Model EEE-141, 142, 143, 144 Figure 3-5 Fig. Item Description Function Filter Drain Pan Assy. Oil is drained into this pan and then is pumped through filters to help prolong the use of the oil Basket Rest The baskets hang on this when not in use, or to drain the product after a cook cycle Vat Covers Covers the vat when not in use...

  • Page 20: Set-Up Mode

    Model EEE-141, 142, 143, 144 3-2. SET-UP mODE Upon initial start-up, the controls will ask to confirm the set- tings for the fryer. When main power switch is turned on, “OFF” shows in both displays. Press on either side and *SETUP* *ENTER CODE* shows in display. Press 1, 2, 3, and “LANGUAGE” shows on the left display, “ENGLISH” on the right display. buttons to change the operation display to: Greek “EΛΛHNIKA”, Russian “РУССКИИ”, Swedish “SVENSKA”, German “DEUTSCHE”, Portuguese “POR- TUG.”, Spanish “ESPANOL”, or French “FRANCAIS”. Press to continue with the other set-up items which include: • TEMP FORMAT - F or • TIME FORMAT - 12-HR or 24-HR...

  • Page 21: Filling Or Adding Oil

    Model EEE-141, 142, 143, 144 3-3. FILLING OR ADDING OIL The oil level must always be above the heater elements when fryer is heating and at the oil level indicators on the rear of vat. Failure to follow these instructions could result in a fire and/or damage to the fryer. Solid oil is not recommended.

  • Page 22: Morning Start-Up Procedures

    Model EEE-141, 142, 143, 144 3-4. mORNING START-UP 1. Make sure basket support is in vat and vat is filled with oil to the proper level. PROCEDURES Model EEG-141, fill the oil reservoir. See Section 3-10. 2. Move power switch to the ON position and then press to turn on heat for the desired vat. If display shows “IS POT FILLED?” make sure oil is at the proper level (see Section 3-2) and then press √ button for “YES”. Unit automatically goes into the Melt Cycle until the oil temperature reaches 180°F (82°C) and then control automatically exits the Melt Cycle.

  • Page 23: Basic Operation

    Model EEE-141, 142, 143, 144 3-5. BASIC OPERATION The Evolution Elite fryer is availalble as non-auto-lift and auto-lift models. The auto-lift controls, allow the baskets to be automatically lowered into the shortening at the beginning of the cook cycle, and raised from the shortening at the end of the cycle.

  • Page 24: Oil Guardian™ (Auto Top-Off)

    Model EEE-141, 142, 143, 144 3-7. OIL GUARDIAN™ During normal operation, the control automatically monitors vat oil level. If the control senses oil level is too low, unit automat- (Auto Top-Off) ically pumps oil from JIB into vat to keep oil at proper level. manual Top-Off If oil level is a little low, oil can be added to vat at any time from JIB to raise oil level to proper level by following steps...

  • Page 25: Model Eee-141 Oil Reservoir

    Model EEE-141, 142, 143, 144 3-10. mODEL EEE-141 OIL Filling Oil Reservoir RESERvOIR 1. Control displays “JIB IS LOW” and an alarm sounds. 2. Open door and pull reservoir forward and remove reservoir cover. Figure 1. Figure 1 3. Place resovoir cover on bracket on door. Figure 2. 4. Pour oil into reservoir up to fill lines (13 lbs. (6.12 kg.)) and then replace cover and push reservoir back into position.

  • Page 26: Filter - Manual

    Model EEE-141, 142, 143, 144 3-11.A FILTER - mANUAL 1. During normal operation and after a certain number of cook cycles, the Filter Beacon illuminates on the front of the fryer ® (Figure 1), and the control periodically shows “FLTR NOW?” “YES NO”. If X for NO is pressed, fryer resumes normal operation and control suggests filter later.

  • Page 27: 3-11.A

    Model EEE-141, 142, 143, 144 3-11.A FILTER - mANUAL 5. Once vat is filled, display shows “IS POT FILLED?” (Continued) “YES NO”. Make sure vat is full and then press √ button for YES and the control turns “OFF”. 6. If the oil has not pumped back to the proper level in the vat during the SmartFilter Express™ process, press X button for NO and pump runs for another 30 seconds. 7. Display shows “IS POT FILLED?” “YES NO”. Make sure vat is full and then press √...

  • Page 28: Filter - Smart Touch

    Model EEE-141, 142, 143, 144 3-11.B FILTER - SmART TOUCh This section describes how to run an automatic filter procedure using the push-button feature. During normal operation and after a certain number of cook cycles, the control periodically shows “FLTR NOW?” “YES NO”. If filtering is desired, press √ button for YES and display shows “SKIM VAT”, followed by “CONFIRM” “YES NO”. Once the crumbs are skimmed off the top of the oil, press √ button for YES and display shows shows “DRAINING” drain opens and the oil drains from the vat.

  • Page 29: 3-11.B

    Model EEE-141, 142, 143, 144 3-11.B FILTER - SmART TOUCh After trying to fill the vat 3 times without success, the controls then (continued) shows “CHANGE FILTER PAD?” “YES NO”. If changing the filter pad at this time, press √ and change filter pad following the proce- dures in the Changing the Filter Pad or Paper Section. Controls return to normal operation. If filter pad is to be changed at a later time, press X button and “CHANGE FILTER PAD?” reminder shows 15 minutes later. During the next AIF with a new filter pad, if the vat is not filled after 3 tries, the display shows “FILTER SERVICE REQUIRED-SEE TROUBLESHOOTING GUIDE”. If the “Service Required” message appears, then every 15 minutes the display shows “FILTER PROBLEM FIXED? YES NO”. If the prob- lem has not been fixed, press X button. Once the problem has been resolved, press and controls return to normal operation.

  • Page 30: Manual Daily Filtering

    Model EEE-141, 142, 143, 144 3-12.A mANUAL DAILY This filtering procedure allows for a more thorough cleaning of FILTERING the vat and should be done once a day. The vat can be filtered during any non-frying times. To avoid burns from hot oil, use approved safety equip- ment including, apron, face shield and gloves before starting filtering procedure. Also, to avoid overfilling the drain pan, drain only 1 vat at a time.

  • Page 31: 3-12.A

    Model EEE-141, 142, 143, 144 3-12.A mANUAL DAILY 7. Use the lift tool and lift the hinged element from the vat to clean the bottom of the vat. Figure 4. FILTERING (continued) Use protective cloth or gloves when lifting the element with the lift tool.

  • Page 32: 3-12.A

    Model EEE-141, 142, 143, 144 3-12.A mANUAL DAILY 13. Press √ button for YES if another rinse is needed, otherwise FILTERING press X button for NO. Display shows “POLISH?” “YES”. (continued) 14. Press √ button for YES and oil is “polished” by circulating it through the filtering system. The display shows “5:00 X=STOP”. If desired, press X button to stop the polishing, otherwise the oil is polished for 5 minutes. 4. Once the oil is polished, the display shows “FILL VAT?”...

  • Page 33: Smart Touch Daily Filtering

    Model EEE-141, 142, 143, 144 3-12.B SmART TOUCh DAILY FILTERING Put on protective gear: Be sure to use all McDonald’s approved safety equipment including, apron, face shield and gloves. Never begin filtering until you’re wearing all safety gear. Hot oil can cause severe burns. Moving the fryer or filter drain pan while containing hot oil is not recom- mended. Hot oil can splash out and severe burns could result. Check Filter Pan: Use a new filter pad on the first filter of each day, but the same filter pad can be used the rest of the day, except for fish vats. Change the filter pad after filtering a fish vat.

  • Page 34: 3-12.B

    Model EEE-141, 142, 143, 144 3-12.B SmART TOUCh DAILY FILTERING Do not use steel wool, other abrasive cleaners or cleaners/sanitizers (continued) containing chlorine, bromine, iodine or ammonia chemicals, as these will deteriorate the stainless steel material and shorten the life of the unit. Do not use a water jet (pressure sprayer) to clean the unit, or component damage could result.

  • Page 35: Manual Discarding Oil From Vat Using Optional Discard Shuttle

    Model EEE-141, 142, 143, 144 3-13. A mANUAL DISCARDING OIL FROm vAT USING OPTIONAL OIL DISCARD ShUTTLE WITh PROLONGED USE, ThE FLAShPOINT OF OIL IS REDUCED. DISCARD OIL IF IT ShOWS SIGNS OF EXCESSIvE SmOKING OR FOAmING. SERIOUS BURNS, PERSONAL INjURY, FIRE, AND/ OR PROPERTY DAmAGE COULD RESULT.

  • Page 36: Auto Discarding Oil From Vat Using Optional Discard Shuttle

    Model EEE-141, 142, 143, 144 3-13. A AUTO DISCARDING OIL Open center door, pull the drain pan assembly from under fryer and FROm vAT USING OPTIONAL replace with oil discard shuttle. OIL DISCARD ShUTTLE Press and hold (on either side) until display shows “*FILTER MENU*”, along with “1.AUTO FILTER?”. Press and release ▼ button twice until display shows “3.DISPOSE”. Press √...

  • Page 37: Discarding Oil From Vat Using Optional Front Dispose System

    Model EEE-141, 142, 143, 144 3-14. DISCARDING OIL FROm vAT USING OPTIONAL FRONT “BULK OIL DISPOSE?” in the Special Program Mode or DISPOSE SYSTEm Set-Up Mode, must to set to “FRONT” for the Front Dispose System to operate. 1. Locate dispose hose. Figure 1. 2. Press and hold until display shows“*FILTER MENU*”, along with “1.EXPRESS FILTER?”. Figure 1 3. Press and release button twice until display shows “3.DISPOSE”. Press √ button; display shows “DISPOSE?”...
  • Page 38 Model EEE-141, 142, 143, 144 3-14. DISCARDING OIL 10. Display shows “HOLD DISPOSE SWITCH” and FROm vAT USING OPTIONAL FRONT “X=DONE”. While holding the wooden handle, make sure hose nozzle is pointed into the disposal container and then DISPOSE SYSTEm press and hold dispose switch to pump oil from drain pan. (Continued) Figure 4.

  • Page 39: Discarding Oil From Vat Using Optional Bulk Oil Dispose System

    Model EEE-141, 142, 143, 144 3-15. DISCARDING OIL 1. Connect female quick disconnect attached to the hose at the rear of fryer, to the correct male quick disconnect at FROm vAT USING the wall. Once attached, the hose can remain connected OPTIONAL BULK OIL unless the fryer is moved.

  • Page 40: Changing The Filter Pad

    Model EEE-141, 142, 143, 144 3-15. DISCARDING OIL 8. Display shows “CLN VAT COMPLETE” “YES NO”. FROm vAT USING Once vat is clean, press √ button. OPTIONAL BULK OIL 9. Display shows “DISPOSE” and then “√=PUMP” DISPOSE SYSTEm “X=DONE”. Press √ button. (Continued) 10. Display shows “DISPOSING...” “X=STOP and oil is pumped from drain pan to bulk oil container. When all oil is pumped from pan, press X button (STOP). 11.
  • Page 41 Model EEE-141, 142, 143, 144 3-16. ChANGING ThE FILTER PAD (Continued) 3. Lift the pan cover from the drain pan. Figure 3. Figure 3 4. Lift the crumb basket from the drain pan. Wipe the oil and crumbs from the crumb basket. Clean the crumb basket with soap and water, then thoroughly rinse with hot water. Figure 4.
  • Page 42 Model EEE-141, 142, 143, 144 3-16. ChANGING ThE FILTER PAD (Continued) 7. Remove the bottom screen from pan and clean thoroughly with soap and water. Rinse thoroughly with hot water. Figure 7. Figure 7 8. Wipe the oil and crumbs from the drain pan. Clean the drain pan with soap and water, then thoroughly rinse with hot water.

  • Page 43: Removing And Cleaning Basket Rest

    Model EEE-141, 142, 143, 144 3-17. REmOvING AND The basket rest, on the rear shroud of the fryer, should be re- CLEANING BASKET moved and cleaned periodically. REST Use protective gloves when removing the basket rest. The basket rest may be hot and burns could result. 1.

  • Page 44: 3-18.A

    Model EEE-141, 142, 143, 144 Press and hold until display shows “1.EXPRESS FILTER?”. 3-18.A CLEAN-OUT mODE - mANUAL Press and release ► button several times until display shows (Continued) “CLEAN-OUT”. Press √ button; display shows “OIL RMVD” “YES NO”. If oil has already been removed, press √ button and control skips down to “Solution Added?” step. If vat still has oil, press X button; display shows “DISPOSE?” “YES NO”. Press √ button to dispose of the oil, or press X button to exit Clean-Out Mode. Display shows “IS DISPOSAL UNIT IN PLACE” “YES NO”. If “NO” is selected, display shows “INSERT DIS POSAL UNIT”. Once disposal unit is in place, press √ button for YES; display shows “OPEN DRAIN”. Open drain, display shows “DRAINING” and oil drains from vat. Display shows “VAT EMTY” “YES NO”. Press √ button when ready; display shows “CLOSE DRAIN”; close drain. Bulk Oil Systems Only! Display shows “CHK PAN” if the filter drain pan is missing. Once pan is in place, display shows “OPEN DRAIN”. Pull-out drain knob and display shows “DRAINING” and oil drains from vat. Display then shows “√=PUMP” “X=DONE. Press √ button, display shows “DISPOSING” and oil is pumped from drain pan. Once pan is empty, press X button twice and close drain. Display shows “SOLUTION ADDED?” “YES NO”. Fill vat with hot water to 1 in. (25 mm) above the top fill line, add 4 ozs. (0.12 liters) of open fryer cleaner, and mix thoroughly. Press √ button and display...

  • Page 45: 3-18.A

    Model EEE-141, 142, 143, 144 3-18.A CLEAN-OUT mODE - Empty filter drain pan of internal filtering components and move mANUAL components to a sink to be cleaned. Return empty filter drain (Continued) pan and cover to fryer, making sure it is pushed securely into place and the latch fully engaged. Pull-out drain knob and drain half the vat contents into filter drain pan. Remove drain pan from unit and dispose of cleaning solution. To avoid burns when pouring hot solution, wear gloves and protective gear and take care to avoid splashing.

  • Page 46: Clean-Out Mode - Smart Touch

    Model EEE-141, 142, 143, 144 3-18.A CLEAN-OUT mODE - Pull drain pan from under fryer and dispose of rinse water. mANUAL Thoroughly dry the vat with a towel, and then press the √ button. (Continued) Controls return to normal operations. Make sure drain is closed. Make sure the inside of the vat, the drain valve opening, and all the parts that come in contact with the new oil are as dry as possible.

  • Page 47: 3-18.B

    Model EEE-141, 142, 143, 144 3-18.B CLEAN-OUT mODE - Press and hold until display shows “1.EXPRESS FILTER?”. SmART TOUCh (Continued) Press and release ► button several times until display shows “CLEAN-OUT”. Press √ button; display shows “OIL RMVD” “YES NO”. If oil has already been removed, press √ button and control skips down to “Solution Added?” step. If vat still has oil, press X button; display shows “DISPOSE?” “YES NO”. Press √ button to dispose of the oil, or press X button to exit Clean-Out Mode. Display shows “IS DISPOSAL UNIT IN PLACE” “YES NO”. If “NO” is selected, display shows “INSERT DISPOSAL UNIT”. Once disposal unit is in place, press √ button for YES; the drain will open automatically and display shows “DRAINING” and oil drains from vat. Display shows “VAT EMTY” “YES NO”. Press √ button when ready. Bulk Oil Systems Only! Display shows “CHK PAN” if the filter drain pan is missing. Once pan is in place, the drain will open automati- cally and display will show “DRAINING” and oil drains from vat.

  • Page 48: 3-18.B

    Model EEE-141, 142, 143, 144 3-18.B CLEAN-OUT mODE - Using a 1/2 gal. (2 liter) stainless steel pitcher, remove the solution SmART TOUCh from the vat, pouring it into a heat-resistant pail for disposal. Any remaining solution can be drained into the drain pan for disposal (Continued) Using the open fryer brush (never use steel wool), scrub the inside of the vat. At the end of the one hour, display shows “CLN...

  • Page 49: Check/Replace Filter Drain Pan O-Rings

    Model EEE-141, 142, 143, 144 3-18.B CLEAN-OUT mODE - Thoroughly dry the vat with a towel, and then press the √ button. SmART TOUCh Controls return to normal operations. (Continued) Make sure drain is closed. Make sure the inside of the vat, the drain valve opening, and all the parts that come in contact with the new oil are as dry as possible. Clean and thoroughly dry the filter pan assembly and return, with new filter pad, to the fryer. Fill vat with oil following the Filling or Adding Oil instructions from Section 3-3.

  • Page 50: Filter Button Stats

    Model EEE-141, 142, 143, 144 3-19. ChECK/REPLACE FILTER 1. Open the door, lift-up on the drain pan stop and pull-out the DRAIN PAN O-RINGS filter drain pan assembly, using the handle on the drain pan. Figures 2 & 3 (Continued) This pan could be hot! Use protective cloth or glove, or severe burns could result.

  • Page 51: Info Button Stats

    If no buttons are pressed within 5 seconds in any of stats modes, the controls revert back to normal operation. As in all food service equipment, the Henny Penny open fryer does require care and proper maintenance. The table below 3-22.

  • Page 52: Information Mode

    Not all Information Mode functions are discussed in this section. To ensure proper operation of fryer, please consult Henny Penny Corp. before changing any of these settings. For more information on these functions, contact Technical Support at 1-800-417- 8405, or 1-937-456-8405.
  • Page 53 Model EEE-141, 142, 143, 144 4-1. INFORmATION mODE 2. LAST LOAD (Information on recent cook cycles) DETAILS (Continued) Press and “2. LAST LOAD” shows in displays. Press a timer button for the product you want to view the cook data and the LED flashes. Press button to start viewing the cook data. For example, if the left LED is flashing, “PRODUCT FRY L1”...
  • Page 54 Model EEE-141, 142, 143, 144 4-1. INFORmATION mODE 3. DAILY STATS (Operational info of fryer for last 7 days) DETAILS (Continued) Press and “3. DAILY STATS” shows in displays. Press button to start viewing the cook data. Press the right to view data for other days of week. FUNCTION DISPLAY EX: Day for which this data was recorded...
  • Page 55 Model EEE-141, 142, 143, 144 4-1. INFORmATION mODE 4. OIL STATS (info of current oil and avg. of last 4 batches of DETAILS (Continued) oil) Press and “4. OIL STATS” shows in displays. Press button to start viewing the cook data. FUNCTION DISPLAY EX: Start date of new oil (L/R) NEW OIL MAR-23 Number of days oil in use...
  • Page 56 Model EEE-141, 142, 143, 144 4-1. INFORmATION mODE 5. REvIEW USAGE(accumulated info since the data was DETAILS (Continued) reset) Press and “5. REVIEW USAGE” shows in displays. Press button to start viewing the cook data. FUNCTION DISPLAY EX: Day the usage data was previously reset SINCE APR-23 2011 Number of Hours the fryer was on (L/R) ON HRS Number of times filtered...

  • Page 57: Section 5. Product Program Mode

    Model EEE-141, 142, 143, 144 SECTION 5. PRODUCT PROGRAm mODE This mode allows you to program the following: • Change Product Name • Include in Filter Count (Global) • Assign Button • Filter at X no. of loads (Mixed) • Change Times & Temp • Load Compensation • Change Cook ID • Load Compensation Reference • Alarms • Full Heat • Quality Timers • PC Factor 1. Press and hold button until “PROG” shows in the 5-1. mODIFYING PRODUCT display, followed by “ENTER CODE”. SETTINGS 2. Enter code 1, 2, 3 (first 3 product buttons). “PRODUCT” and “PROGRAM” show in the displays, followed by “SELECT PRODUCT’ and “-P 1-” (ex: NUG).
  • Page 58 Model EEE-141, 142, 143, 144 5-1. mODIFYING PRODUCT To Change Times and Temperatures SETTINGS (Continued) 7. Press button until “COOK TIME” shows in the display, and then use the product buttons, or the buttons, to change the time in minutes and seconds, to a maximum of 59:59. 8. Press button and “TEMP” shows in the display, along with the preset temperature on the right side of the display.
  • Page 59 Model EEE-141, 142, 143, 144 5-1. mODIFYING PRODUCT Mixed Filter Tracking Filter After X Number of Loads SETTINGS (Continued) 12b. Press button until “FILTER AFTER...” flashes in the left display along, and the number of cook cycles between filters shows in the right display. Press the product buttons, or the buttons, to change this value of 0 to 99 loads.

  • Page 60: Section 6. Level 2 Programming

    Model EEE-141, 142, 143, 144 SECTION 6. LEvEL 2 PROGRAmmING Used to access the following: • Tech Mode • Special Program Mode • Stats • Clock Set • Filter Control • Data Communication • Heat Control 6-1. SPECIAL PROGRAm The Special Program Mode is used to set more detailed mODE programming, such as: SP-1 • Degrees Fahrenheit or Celsius SP-2 • Language: English, Greek “EΛΛHNIKA”, Russian...
  • Page 61 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm SP-24 • Serial No. of Fryer mODE (Continued) SP-25 • Change Mgr. Code- 1 = YES SP-26 • Change Usage Code - 1 = YES SP-27 • Dispose Requires Code ? - YES or NO SP-28 • Longer Fill Time Enabled - YES or NO SP-29 • Let User Exit Fill? - YES or NO SP-30 • Skip ‘SKIM’ Prompt? - YES or NO SP-31 • 2-Stage Wash Enabled? - YES or NO Press and hold the button for 5 seconds until “LEVEL 2”...
  • Page 62 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Audio volume (SP-4) mODE (Continued) Press button and “SP-4” and “VOLUME” flash in left display. Press or , or use product buttons, to adjust speaker volume, 10 being loudest and 1 is the most quiet. Audio Tone (SP-5) Press button and “SP-5” and “TONE” flash in the left display. Press the , or use product buttons, to adjust the tone of the speaker, 2000 being the maximum value and 50 the minimum.
  • Page 63 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Filter Tracking mode (SP-8) Filter Tracking signals the operator when the oil needs filtering mODE (Continued) by counting the number Cook Cycles between filters. Press button and “SP-8” and “FILTER TRACKING MODE” show in display. Use the buttons to choose either “1.MIXED” filter tracking or “2.GLOBAL”. GLOBAL means all the products have the same number of cook cycles between filters. MIXED means each product may be set with different No.
  • Page 64 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Filter Tracking mode (SP-8) (Continued) GLOBAL mODE (Continued) If GLOBAL is selected, press button. Split Vat If unit is a split vat, “SP-8A” and “LEFT VAT FILTER CYCLES” shows in left display, and the number of cook cycles between filters shows on right display (0 to 99). Use to change this number, or product buttons. Press button and “SP-8B” and “RIGHT VAT FILTER CYCLES”...
  • Page 65 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Polish Duration (SP-9) mODE (Continued) Press button and “SP-9 POLISH TIME” flashes in the left display. Press the , or use prod uct buttons, to change polish time, from 0 to 10 minutes. Change Filter Pad Reminder Time (SP-10) Press button and “SP-10 CHANGE PAD’ REMINDER”...
  • Page 66 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm 2nd Language (SP-16) mODE (Continued) Press button and “SP-16 2ND LANGUAGE” flashes on the left display. Press the buttons to select the desired 2nd language. By setting a 2nd language in the controls, 2 languages can now be chosen by pressing button during normal operation.
  • Page 67 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Autolift Enabled (SP-21) Press button and “SP-21 AUTOLIFT ENABLED?” mODE (Continued) flashes in the left display. Press the or buttons to choose “YES LIFT” or “NO LIFT”. If fryer is fitted with the auto-lift option, SP-21 must be set to “YES LIFT”, otherwise, set SP-21 to “NO LIFT”. Bulk Oil Supply (SP-22) Press button and “SP-22 BULK OIL SUPPLY?” flashes in the left display. Press the or buttons to choose “YES SUPL” or “NO SUPL”. Set to YES if the oil is pumped into the vats from an outside oil reservoir.
  • Page 68 Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Program Code Change (SP-25) (Continued) mODE (Continued) If satisfied with code, press and “*CODE CHANGED*” shows in display. If not satisfied with code, press and “*CANCEL” shows in display, then reverts back to “SP-25” and “CHANGE, MGR CODE? 1=YES”. Now the above steps can be repeated. Usage Code Change (SP-26) This allows the operator to change the reset usage code (factory set at 1, 2, 3) to reset the usage amounts of each product.

  • Page 69: Do Not Disturb

    Model EEE-141, 142, 143, 144 6-1. SPECIAL PROGRAm Skip ‘SKIm’ Prompt (SP-30) Press button and “SP-30 SKIP ‘SKIM’ PROMPT?” mODE (Continued) flashes in the left display. Press the or buttons to choose YES or NO. 2-Stage Wash Enabled (SP-31) Press button; “SP-31 2-STAGE WASH ENABLED?” flashes in the left display. Press the or buttons to choose YES or NO. 6-2. DO NOT DISTURB Time periods of peak operations during which the “FILTER NOW?” message will not appear, may be programmed into the fryer. There are three groupings of days - Monday thru Friday (M-F), Saturday (SAT), and Sunday (SUN). Within each day grouping, up to 4 time periods (M-F 1 thru M-F 4, SAT 1 thru SAT 4, and SUN 1 thru SUN 4) may be programmed.

  • Page 70: Clock Set

    The Data Logging, Heat Control, Tech, Stat and Filter Control CONTROL, TECh, STAT, Modes are advanced diagnostic and program modes, mainly for AND FILTER CONTROL Henny Penny use only. For more information on these modes, mODES contact the Service Department at 1-800-417- 8405 or 1-937- 456-8405.

  • Page 72: Section 7. Troubleshooting

    Model EEE-141, 142, 143, 144 SECTION 7. TROUBLEShOOTING 7-1. TROUBLE ShOOTING GUIDE Problem Cause Correction POWER switch ON • Open circuit • Plug fryer in but fryer completely • Check breaker or fuse at supply inoperative • (Non-US/some Int’l. locations only) Breakers in fryer tripped-open left door and reset breaker on fryer;...
  • Page 73 Model EEE-141, 142, 143, 144 7-1. TROUBLE ShOOTING GUIDE (Continued) Problem Cause Correction Oil foaming or boiling • Water in oil • Drain and clean oil over top of vat • Improper or bad oil • Use recommended oil • Improper filtering • Refer to filtering procedures • Improper rinsing after • Clean and rinse vat and then cleaning the vat...

  • Page 74: Error Codes

    Model EEE-141, 142, 143, 144 7-2. ERROR CODES In the event of a control system failure, the digital display shows an error message. The message codes are shown in the DISPLAY column below. A constant tone is heard when an er- ror code is displayed, and to silence this tone, press any button.
  • Page 75 Model EEE-141, 142, 143, 144 7-2. ERROR CODES (Continured DISPLAY CAUSE CORRECTION “E-21” Slow heat recovery Have a certified service technician check the fryer for correct voltage to the unit; have heat circuit checked; have unit checked for loose or burnt wire “E-22” Elements not heating Have power cord and heat circuit “NO HEAT”...
  • Page 77 Henny Penny Corporation P.O.Box 60 Eaton,OH 45320 1-937-456-8400 1-937-456-8402 Fax Toll free in USA 1-800-417-8417 1-800-417-8434 Fax *FM05-053-I* www.hennypenny.com Henny Penny Corp., Eaton, Ohio 45320, Revised 4-27-15...

This manual is also suitable for:

Evolution elite eee-141Evolution elite eee-143Evolution elite eee-144

Table of Contents