Henny Penny Evolution Elite EEE-153 Technical Manual page 58

6-13. FILTER PUMP & MOTOR
(Continued)
6-17
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
Motor Removal:
1. Remove JIB from fryer.
2. Remove the rear panel and the right side panel.
3. Using a 7/8" wrench, loosen the front, fl exible line fi tting,
on the pump.
4. Using a 1" wrench, loosen the rear pump fi tting.
5. Using Phillip's-head screwdriver, remove the rear cover
from motor, exposing the wires.
6. Loosen the conduit clamp and pull the wires through the
conduit clamp.
Model EEE-153, 154
409