Henny Penny Evolution Elite EEE-153 Technical Manual page 32

5-1. SPECIAL PROGRAM
MODE (Continued)
5-9
Program Code Change (SP-25) (Continued)
If satisfi ed with code, press
CHANGED*" shows in display.
If not satisfi ed with code, press
shows in display, then reverts back to "SP-25" and
"CHANGE, MGR CODE? 1=YES". Now the above steps
can be repeated.
Usage Code Change (SP-26)
This allows the operator to change the reset usage code (factory
set at 1, 2, 3) to reset the usage amounts of each product. See
Review Usage step in Information Mode.
Press button and "SP-26 CHANGE USAGE
CODE? 1=YES" fl ashes in the display. Press
"ENTER NEW CODE, P=DONE, I=QUIT show scrolls
through display. Press product buttons for new code.
If satisfi ed with code, press
CODE, P=DONE, I=QUIT, shows in display. Press same
code buttons.
If satisfi ed with code, press
shows in display.
If not satisfi ed with code, press
shows in display, then reverts back to "SP-26" and
"CHANGE, USAGE CODE? 1=YES". Now the above
steps can be repeated.
Dispose Requires Code ? (SP-27)
Press button and "SP-27 DISPOSE REQUIRES
CODE ?" fl ashes in the left display. Press the
buttons to choose YES or NO. If set to YES, code 1, 2, 3
must be entered to discard the oil from the vat, using the
Dispose Mode.
Longer Fill Time (SP-28)
Press button and "SP-28 LONGER FILLTIME
ENABLED?" fl ashes in the left display. Press the
buttons to choose YES or NO.
Let User Exit Fill (SP-29)
Press button and "SP-29 LET USER EXIT FILL"
fl ashes in the left display. Press the
buttons to choose YES or NO. If YES is chosen, the user
can exit the Express Filter
Model EEE-153, 154
and "*CODE
and "*CANCEL"
and "REPEAT NEW
"*CODE CHANGED*"
and "*CANCEL"
or
TM
fi ll operation.
and
or
or
911