Henny Penny Evolution Elite EEE-153 Technical Manual page 31

5-1. SPECIAL PROGRAM
MODE (Continued)
911
Autolift Enabled (SP-21)
Press button and "SP-21 AUTOLIFT ENABLED?"
fl ashes in the left display. Press the
to choose "YES LIFT" or "NO LIFT".
If fryer is fi tted with the auto-lift option, SP-21 must be set
to "YES LIFT", otherwise, set SP-21 to "NO LIFT".
Bulk Oil Supply (SP-22)
Press button and "SP-22 BULK OIL SUPPLY?"
fl ashes in the left display. Press the
to choose "YES SUPL" or "NO SUPL".
Set to YES if the oil is pumped into the vats from an
outside oil reservoir. Otherwise, set SP-22 to NO.
Bulk Oil Disposal (SP-23)
Press button and "SP-23 BULK OIL DISPOSE?"
fl ashes in the left display. Press the
to choose "YES DISP" or "NO DISP".
Set to "YES DISP" if the oil is pumped from the vats to an
outside oil reservoir when disarding the oil. Otherwise, set
SP-23 to "NO DISP".
Serial Number Log (SP-24)
Press button and "SP-24 S/N
displays, along with the serial number of the unit. THIS
SERIAL NUMBER SHOULD MATCH THE SERIAL
NUMBER ON THE DATA PLATE, ON THE DOORS. IF
NOT, IT CAN BE RECORDED.
Program Code Change (SP-25)
This allows the operator to change the program code (factory
set at 1, 2, 3) used to access Product Programming and Level 2
Program Mode.
Press button and "SP-25 CHANGE MGR CODE?
1=YES" fl ash in the display. Press
NEW CODE, P=DONE, I=QUIT show scrolls through the
display. Press the product buttons for new code.
If satisfi ed with code, press
CODE, P=DONE, I=QUIT, shows in display. Press same
code buttons.
Model EEE-153, 154
or buttons
or buttons
or buttons

EDIT" fl ashes in the
and "ENTER
and "REPEAT NEW
5-8