6-19. FILTER BEACON
6-23
®
Replacement
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
1. Remove right or left side panel for end vats, or hinge-down
the control panel for center vats.
2. Pull apart the light by pulling on the rear of the light and
removing the front part of the light from the front of the
fryer.
3. Locate and cut the light wires and pull the light from unit.
4. Connect new light wires, using wirenuts and install light in
reverse order.
5. Restore power to the unit.
Model EEE-153, 154
409