Rack For Ganz Encoder - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series Webpage User's Manual

6.3. Rack for GANZ encoder

4 separate modules are installed on each blade of ZN‐RS4000 SERIES. And each of module
works as ZN‐S1000VE, 1channel encoder solution does in most of specification but some of
functions are limited and refer to the explanation of the below.
Video Input
4 video inputs are supported and the user interface of video input per module is as same as
ZN‐S1000VE.
Event Configuration
Module 0: DI/DO are supported for event publisher
Module 1: DI/DO are supported for event publisher
Module 2: DI/DO are NOT supported for event publisher
Module 3: DI/DO are NOT supported for event publisher
USB/SD Storage
1 of USB storage per 1 blade is supported (module0)
SD is NOT supported
USB Wireless LAN
Module0 only supported
DI/DO Control
Module 0: 2 of DI / 1 of DO are supported
Module 1: 2 of DI / 1 of DO are supported
Module 2: DI/DO are NOT supported
Module 3: DI/DO are NOT supported
UART Setting for serial device
RS232C ‐ Module0 only supported
RS485 ‐ Module0 only supported
2010/2‐1 03A.00 79