GANZ Network camerab and encoder series
4.3. VIDEO & AUDIO
4.3.1. Video input (channel naming/video format/ color control)
NOTE : This video input setting page is based on 1 channel encoder, ZN‐S1000VE. If your
camera or encoder model is other than ZN‐S1000VE, move to the chapter '6.REFERENCE TO
MODEL' and you can refer to the different part only from this page.
Naming of channel for camera
You can type any friendly name for the channel in case you have multiple channels with GANZ
ENCODER AND NETWORK CAMERA series. It helps you distinguish the location of cameras. Like
an example above, if you want to name the first camera as Video, just type the friendly name
as Video
NTSC or PAL
You can choose one of the video standards according to your region.
High Performance image processing
'Enable Deinterlace Algorithm' enables high performance of image by merging the even fields
and odd fields at the encoder side. If you don't want to use this function, just uncheck the box.
•
Hardware platform : Processed by the hardware chip of GANZ ENCODER AND
NETWORK CAMERA board (0% of DSP is used up)
•
DSP software ‐ best quality : Processed by the software of DSP (approx. 15% of DSP is
used up)
2010/2‐1 03A.00
Webpage User's Manual
23