Assigning Event Rule To Event Publishers - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series

4.4.2. Assigning event rule to event publishers

Supported subscribers per each publisher:
Publishers
DI
DO
Video
Motion Detection
VCA
Network
Health
The below is an example page of DI event configuration. For each event server setting, refer
to the section '4.4.1. How to configure each event server'.
When you set DI as a publisher, DO, Email, Multicast, TCP, HTTP, and FTP server can be the
subscriber of DI triggering.
Subscriber – DO
Check the DO box you want to trigger and click Apply button. For example, if you check off the
DO #1 of DI #2 => when DI #1 is detected, DO#2 will be activated.
Subscriber – Email
If you check 'Post notification message,' and click Apply button, the server will send the
notification message by e‐mail to the client when DI detection is occurred. [System Option ‐
SMTP] and email account must be configured to activate this function.
If you check 'Attach a snapshot,' captured image will be attached to the email.
2010/2‐1 03A.00
Subscribers
DO, Email, Multicast, TCP, HTTP, FTP
Email, Multicast, TCP, HTTP, FTP
Email, Multicast, TCP, HTTP,
Email, Multicast, TCP, HTTP, FTP
DO, Email, Multicast, TCP, FTP
Email, Multicast, TCP
Multicast, TCP
Webpage User's Manual
37