Table of Contents
Advertisement
GANZ Network camerab and encoder series
2. USING A WEB BROWSER
Once the Ethernet connection has been established, you have the following possibilities to see
the first image of the camera. But if it is the first time for you to access the webpage of GANZ
ENCODER AND NETWORK CAMERA series, you may face the ActiveX installation message.
2.1. ActiveX Installation (AxNVC.cab)
Click "pop‐up blocked" and install the Active X control as below. You need to install ActiveX for
displaying the images.
If you have failed to install ActiveX, please follow the next step.
i
Delete "AxNVC" in "C:\WINDOWS\Downloaded Program Files" and connect
again to Web Page with ZNS‐GIT IPAdimn Tool or direct typing so that Active
X installer can be downloaded again.
Note
Or you can upload ActiveX (UMC.cab) manually with ZNS‐GIT IPAdimn Tool,
the IP management utility.
2010/2‐1 03A.00
Webpage User's Manual
9
Advertisement
Table of Contents
Need help?
Do you have a question about the H.264 Network Encoder Series and is the answer not in the manual?
Questions and answers