GANZ Network camerab and encoder series
Webpage User's Manual
4.3.4. Audio (listening, speaking)
Listening to the audio
This page helps you to set the values for capturing the analogue audio generated at the
camera installed site. After the configuration of 'Listen', you can listen to the sound with the
speakers of your PC. To listen to the captured sound, go to the View page and check the SPK
box. If you uncheck the box of 'Enable capture and compression audio,' it will disable the
server to capture the sound.
Sampling frequency
You can choose the sampling frequency.
Channel
Only mono type is provided.
Codec
You can choose the proper codec from PCM and G.711.
Volume control
The volume is adjusted from 1 and 255. The default is 128.
Talking to the speakers
You can set the values for talking to the speakers directly connected to the GANZ ENCODER
AND NETWORK CAMERA server. To enable this feature you need to connect the microphone
with the audio port of your PC. If you uncheck the box of 'Enable audio to receiving and
playback', it disables the 'Talk to' feature.
2010/2‐1 03A.00
29