Ganz H.264 Network Encoder Series User Manual page 35

GANZ Network camerab and encoder series
2. How to set the Multicast server for sending an event message
You can use Multicast server to get the event notification from GANZ ENCODER AND
NETWORK CAMERA and send them to the client application. This page helps you to configure
the Multicast server.
3. How to set the TCP server for sending an event message
You can use TCP server to get the event notification from GANZ ENCODER AND NETWORK
CAMERA and send them to the client application. This page helps you to configure the TCP
server.
2010/2‐1 03A.00
Webpage User's Manual
Type a message
name to show on
event message
program
Type Address, port,
and TTL according
to your system
setting. Factory
default is 2555.
Type a message
name to show on
event message
program
Type port number
according you will
use for TCP
message. Factory
default is 2555.
35