Safety Mode; What Is Safety Mode; Why Your Ganz Encoder And Network Camera System Boots In Safety Mode; How To Recover Your System From Safety Mode - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series Webpage User's Manual

5. SAFETY MODE

5.1. What is Safety Mode?

Your GANZ encoder and network camera system could encounter an unexpected occasion
such as broken firmware file or uncompleted loading of firmware file during system booting.
To restore the system after the emergency cases, GANZ encoder and network camra system
provides the emergency firmware as a factory default. Your system will get restarted with
Safety Mode when there is any error on your booting system files.
5.2. Why your GANZ encoder and network camera system boots in
Safety Mode?
Normally, the cause of 'safety mode' is classified into 3 types.
* When the power supply is unplugged in the middle of system booting.
* When the firmware files required for system booting are damaged.
* When a user has not completed the booting files system and try to boot the system (Applied
only for the case of Server Side SDK user)
IMPORTANT : GANZ ENCODER AND NETWORK CAMERA do not turn into the safety mode
booting until 5 times of normal booting are tried.

5.3. How to recover your system from Safety Mode?

2010/2‐1 03A.00 75