Nat Setting (Port Mapping) - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series Webpage User's Manual

4.5.2. NAT setting (Port mapping)

If you use the NAT router for the GANZ ENCODER AND NETWORK CAMERA network
connection, you may need to set the real IP address or domain name and port number.
1. Check the box of 'Enable network connection via public IP address and port'.
2. Type the IP address and port number that your router uses.
3. Click Apply button (if you want to go back to previous setting, click Reset button).
When you use domain name, you should check out if the DNS or DDNS is enabled.
Go to [System Option – TCP/IP] for DNS setting.
Go to [System Option – DDNS] for DDNS setting.
NOTE: The IP address of NAT router should be designated manually.
2010/2‐1 03A.00 41