Led Setting - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series Webpage User's Manual

4.5.11. LED Setting

NOTE : This LED setting page is based on ZN‐S1000VE and this page can be different
according to your GANZ ENCODER AND NETWORK CAMERA model type. Refer to the chapter
6. REFERENCE TO MODELS.
You can customize the LED operation according to your system requirement. Please refer to
the example scenario first.
Example of configuration
Scenario :
"When the video signal loss is detected, let top LED blink for every 5 seconds"
Setting :
Top Yellow ‐ Ticked
Event Publisher ‐ vsignal
Operation ‐ Blink
Time Out – 5
Option – Turn on the LED of vsignal : Select 'When video signal loss is detected'.
Basic configuration
1. Check the 'Enable LED' box to enables the LED function.
2. Select the 'Event Publisher' you want to apply for the TOP yellow / Bottom green LED.
2010/2‐1 03A.00 61