What's New - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series Webpage User's Manual

WHAT'S NEW

K00.99.03
[View] : Check box of OSD is removed
[Date&Time] : Additional comment(NTP default setting) is added
[Video Out] : Removed
[RTSP/RTP] : 'Include meta stream' is added
[AVI File Recorder] : Secondary stream recoding(MJPEG) is added
[LED] : LED configuration is added for the event subscribing
[System Log] : The system log configuration is added
K00.99.05
[System Log] : The configuration page is modified (No more options for number of file)
[User] : User Authentication is modified
K00.99.08
[VCA] : Configuration page deleted
[Codec] : Q value for VBR mode is added
[View page] : Description of OSD and burnt‐in text added
K00.99.14
[VCA] : Configuration page inserted (Enabled only with license)
[NAT] : NAT page for port mapping is added
[DDNS] : Dynamic DNS is added
[UART] : Serial Over IP setting is added
[LED] : The number of LED has reduced from 4 to 2.
[AVI File Recorder] : Storage recycling option added
[AVI File Recorder] : Recording segmentation option added
[Webpage] : VIEW option for Video Contents Analysis stream is added
K1.00.04
[Video‐in] : Options for software deinterlace added
K1.00.07
[UART] : UART setting page updated per model
[RTSP/RTP] : NAL unit option is added
[RTSP/RTP] : Authentication option is added
[LED] : LED option for Heart beat is added
[TCP/IP] : Domain name for DNS configuration is not supported
K1.02.01
[SMTP] : Authentication for login is deleted
[SMTP] : SSL and TLS encryption is added
[Rack for GANZ encoder] : Rack information for multi channel solution is added
[Event Configuration] : HTTP server is added for event notifying server
[Event Configuration] : FTP server is added for event notifying server
[VCA] : Recording by VCA event triggering is added
[ZN‐DT350SERIES H.264 NETWORK DOME CAMERA] : IR Cut filter control page is deleted
2010/2‐1 03A.00 4